manualshive.com logo in svg

Lincoln 1996 Continental, Owner'S Manual

The Lincoln 1996 Continental Owner's Manual is an essential guide for owners of this elegant vehicle. With a seamless blend of comfort and performance, this manual provides detailed instructions and maintenance tips. Download your free digital copy from manualshive.com to unleash the full potential of your Lincoln Continental.

Share
Download
background image

/!\ WARNING

Do not spin the wheels at over 35 mph (55
km/h).  The tires may fail and injure a
passenger or bystander.

By moving the vehicle backward and forward, you
may gain enough momentum to move out of the
spot.  Do not rock the vehicle for more than a few
minutes.  This may overheat the engine, damage the
transaxle, or damage the tires.  If you are still stuck
after a minute or two of rocking, call for a tow truck.

High water

Do not drive through flooded areas unless you are
sure that the water is below the bottom of the wheel
rims.

If you must drive through high water, drive slowly.
You may have limited traction or wet brakes, so
allow extra stopping distance because your vehicle
will not stop as quickly as usual.

192

After you drive through the standing water,
apply your brakes gently several times as your
vehicle moves slowly.  This helps to dry the
brakes.

Driving With a Heavy Load

There are limits to the amount of weight your
vehicle can carry or tow.  The total weight of
your vehicle, plus the weight of the passengers
and cargo, should never be more than the
Gross Vehicle Weight Rating (GVWR).  Also,
the weight that your vehicle carries over the
front axle and rear axle should never be more
than the Gross Axle Weight Rating (GAWR)
for the respective axle.

You can find your vehicle's GVWR and
GAWR on the Safety Compliance Certification
Label on the left front door lock facing or on
the door latch post pillar.

Summary of Contents for 1996 Continental


































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Continental

Federal Signal Corporation 7000 Assembly Instructions Manual preview
7000
Brand: Federal Signal Corporation Pages: 13
Acdeos AXS FL Manual preview
AXS FL
Brand: Acdeos Pages: 38
Jeep Cherokee 16 1982 Technical & Service Manual preview
Cherokee 16 1982
Brand: Jeep Pages: 1311
AMP Research 75135-01A Installation Manual preview
75135-01A
Brand: AMP Research Pages: 12
Havis-Shields Half Size Trunk Box Organizer C-TBO-CV Installation Instructions preview
Half Size Trunk Box Organizer C-TBO-CV
Brand: Havis-Shields Pages: 1
Volvo S60 2012 Quick Manual preview
S60 2012
Brand: Volvo Pages: 8
kincrome K12071 Owner'S Assemble And Operating Manual preview
K12071
Brand: kincrome Pages: 6
Tachosys digidl Installation Manual preview
digidl
Brand: Tachosys Pages: 28
Kia 2014 rondo Features preview
2014 rondo
Brand: Kia Pages: 11
Saab 2008 9-7x Owner'S Manual preview
2008 9-7x
Brand: Saab Pages: 426
Hyundai Entourage 2008 Quick Reference Manual preview
Entourage 2008
Brand: Hyundai Pages: 11
Prorack WHISPBAR S53 Fitting Instructions For Basic Carrier preview
WHISPBAR S53
Brand: Prorack Pages: 10
iArmor EDGE IA-W208 Manual preview
EDGE IA-W208
Brand: iArmor Pages: 6
AMP Research BEDXTENDER HD MAX 74841-00A Assembly Installation Manual preview
BEDXTENDER HD MAX 74841-00A
Brand: AMP Research Pages: 9
Belkin F8V7058-APL User Manual preview
F8V7058-APL
Brand: Belkin Pages: 2
Toyota SUPRA 1987 Electrical Wiring Diagram preview
SUPRA 1987
Brand: Toyota Pages: 165
Cadillac XLR-V Specifications preview
XLR-V
Brand: Cadillac Pages: 2
Buick Cascada 2016 Getting To Know Manual preview
Cascada 2016
Brand: Buick Pages: 20

Brands by name

Popular brands

Load more brands