Lincoln 1996 Continental, Owner'S Manual

Page: 101 / 321

NOTE: If your speed increases above your set
speed while driving in (Overdrive) on a
downhill grade, you may want to shift to D
(Drive) to reduce vehicle speed. The speed
control cannot reduce the vehicle speed if it goes
above your set speed on a downhill grade. For
the best fuel economy during normal driving
conditions, leave the shift select in
(Overdrive), or resume as soon as practical.
/!\ WARNING
Do not use the speed control in heavy
traffic or on roads that are winding,
slippery, or unpaved.
Accelerating With the Speed Control
Operating
You can use the accelerator pedal to speed up
momentarily. When you take your foot off the
accelerator, the vehicle will return to the set
speed.
Resetting the Speed Control
To reset the speed control to a lower speed, use
one of the following procedures:
COAST - Press and hold the COAST switch.
Release the switch when the vehicle slows down
to the desired speed.
Lightly tap the brake pedal. When the vehicle
attains the desired speed, press the SET
ACCEL switch and release it immediately.
TAP-DOWN - Press and release the COAST
switch momentarily for each m.p.h. (1.6 km/h)
reduction in speed desired.
If vehicle speed is reduced below 30 mph (50
km/h) by any of the above methods, then you must
manually accelerate to a speed over 30 mph (50
km/h) and reset the system.
97