manualshive.com logo in svg

Lincoln 1996 Continental, Owner'S Manual

The Lincoln 1996 Continental Owner's Manual is an essential guide for owners of this elegant vehicle. With a seamless blend of comfort and performance, this manual provides detailed instructions and maintenance tips. Download your free digital copy from manualshive.com to unleash the full potential of your Lincoln Continental.

Share
Download
background image

Luxury Audio System

Using the Controls on Your New Radio

How to turn the radio on and off

Press the "VOL/PUSH ON" knob to turn the
radio on. Press again to turn it off.

How to adjust the volume

Turn the "VOL/PUSH ON" knob clockwise to
increase the volume and counter-clockwise to
decrease the volume.

NOTE:  

If the volume is set above a certain level

when the ignition is turned off, the volume level
will reset to a "nominal" listening level when the
ignition switch is turned back on.  However, if the
radio is turned off with the "VOL/PUSH ON"
knob, the volume will not reset and will stay at
the same level when the radio is turned back on.

Selecting the AM or FM frequency band

Push the "AM" or "FM1/FM2" button to select
the desired frequency band.  Pushing the
"FM1/FM2" button more than once will
alternate between FM1 and FM2.  These
functions are used with the station memory
buttons described under 

How to tune radio

stations.

HOW to tune radio stations

There -are four ways for 

you 

to tune in a

particular station.  You can use the "TUNE",
"SEEK", 'SCAN”or memory buttons.

 Using the "TUNE" function

You can change the frequency up or down one
increment at a time by Pressing and releasing
either the left (

)

or-right (

) side of the

"TUNE" or "TUNE DISCS" button.  To
change frequencies quickly, press and hold
down either the right or left side of the button.

161

Summary of Contents for 1996 Continental


































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Continental

K&M 8494 Installation Manual preview
8494
Brand: K&M Pages: 3
Waeco MagicWatch MWE250 Installation And Operating Manual preview
MagicWatch MWE250
Brand: Waeco Pages: 172
CALIMA 46008 Operating Instructions Manual preview
46008
Brand: CALIMA Pages: 9
M7 SPEED AGS-R2 Manual preview
AGS-R2
Brand: M7 SPEED Pages: 6
iOttie Aivo Connect Setup Manual preview
Aivo Connect
Brand: iOttie Pages: 58
Bestop Bikini Installation Instructions preview
Bikini
Brand: Bestop Pages: 5
PowerMadd Tri-mount Installation Instructions preview
Tri-mount
Brand: PowerMadd Pages: 3
Mercedes-Benz 2007 SLR Mclaren Operator'S Manual preview
2007 SLR Mclaren
Brand: Mercedes-Benz Pages: 425
Mobileye C2-270 User Manual preview
C2-270
Brand: Mobileye Pages: 29
Buick 1988 Riviera Owner'S Manual preview
1988 Riviera
Brand: Buick Pages: 161
Butts of Bawtry TBT4700 Quick Start Manual preview
TBT4700
Brand: Butts of Bawtry Pages: 2
Belkin LineCast Auto FM User Manual preview
LineCast Auto FM
Brand: Belkin Pages: 15
Rover 75 Saloon Owner'S Handbook Manual preview
75 Saloon
Brand: Rover Pages: 285
Xpresskit 20110601 Installation Manual preview
20110601
Brand: Xpresskit Pages: 12
Honda 2000 RL Owner'S Manual preview
2000 RL
Brand: Honda Pages: 330
Scion 2013 iQ Warranty & Maintenance Manual preview
2013 iQ
Brand: Scion Pages: 58
Toyota Camry Hybrid 2012 Warranty & Maintenance Manual preview
Camry Hybrid 2012
Brand: Toyota Pages: 62
Whelen Engineering Company SAK5 Installation Manual preview
SAK5
Brand: Whelen Engineering Company Pages: 2

Brands by name

Popular brands

Load more brands