manualshive.com logo in svg

Lincoln 1996 Continental, Owner'S Manual

The Lincoln 1996 Continental Owner's Manual is an essential guide for owners of this elegant vehicle. With a seamless blend of comfort and performance, this manual provides detailed instructions and maintenance tips. Download your free digital copy from manualshive.com to unleash the full potential of your Lincoln Continental.

Share
Download
background image

You have an automatic release for the parking brake.
The parking brake should automatically unlock when
you move the gearshift to any forward gear while the
engine is running.  However, the automatic release
does not work when the gearshift is in reverse,
neutral or park.

To manually release the parking brake, pull the
BRAKE RELEASE handle located on the lower left
comer of the instrument panel.  The Brake Warning
Light will illuminate if the parking brake is not fully
released when the engine is running.

The parking brake is not designed to stop a moving
vehicle, but you can use the parking brake to stop
your vehicle in an emergency if the normal brakes
fail.  However, since the parking brake applies only
the rear brakes, the stopping distance will increase
greatly and the handling of your vehicle will be
adversely affected.

190

Always check the Brake Warning light each
time you start your engine.  Driving with the
parking brake on will cause the brakes to wear
out quickly and will reduce the fuel economy.

Driving Under Special Conditions

Tips for Safe Driving

As with any new vehicle, yours may drive and
handle differently from your previous vehicle.
Use care until you become accustomed to its
various features and driving characteristics.

Operate your vehicle within reasonable limits.
Sudden acceleration, deceleration, turning, or
combinations of these maneuvers can cause a
vehicle to behave differently than anticipated.

Summary of Contents for 1996 Continental


































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Continental

Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Brand: Porsche Pages: 144
Beper P205DIF100 Manual preview
P205DIF100
Brand: Beper Pages: 52
Classic AutoAir Mustang 1969 Installation Manual preview
Mustang 1969
Brand: Classic AutoAir Pages: 44
Cadillac Escalade 2004 Escalade ESV Owner'S Manual preview
Escalade 2004 Escalade ESV
Brand: Cadillac Pages: 472
TATA Motors NEXON Owner'S Manual preview
NEXON
Brand: TATA Motors Pages: 232
Edelbrock 8135 Installation Instructions preview
8135
Brand: Edelbrock Pages: 4
Whelen Engineering Company 12H4S140 Installation Manual preview
12H4S140
Brand: Whelen Engineering Company Pages: 4
Buick 1998 Century Owner'S Manual preview
1998 Century
Brand: Buick Pages: 372
Chevrolet 2003 Malibu Owner'S Manual preview
2003 Malibu
Brand: Chevrolet Pages: 354
Toyota 2001 MR2 Spyder Owner'S Manual preview
2001 MR2 Spyder
Brand: Toyota Pages: 234
Automotive Data Solutions iDatalink Maestro RR Manual preview
iDatalink Maestro RR
Brand: Automotive Data Solutions Pages: 139
BMW M5 Owner'S Manual preview
M5
Brand: BMW Pages: 102
Honda 2012 Fit Navigation Manual preview
2012 Fit
Brand: Honda Pages: 199
Volkswagen Bora 1998 Service Manual preview
Bora 1998
Brand: Volkswagen Pages: 339
Whispbar K144W Fitting Instructions Manual preview
K144W
Brand: Whispbar Pages: 78
Kia FORTE Manual preview
FORTE
Brand: Kia Pages: 38
Datsun Estate I300 Workshop Manual preview
Estate I300
Brand: Datsun Pages: 104
Autel MaxiTrip TP100 Manual preview
MaxiTrip TP100
Brand: Autel Pages: 26

Brands by name

Popular brands

Load more brands