The high beam indicator light on the instrument
cluster will not be on.
NOTE:
If you have a vehicle with an
automatic lighting system, the DRL system is
active until the automatic system turns on the
headlamps.
NOTE:
You may notice that the lights
flicker when the vehicle is turned on or off. This
is a normal condition.
/!\WARNING
The Daytime Running Light (DRL)
system will not illuminate the tail
lamps and parking lamps. Turn on
your headlamps at dusk. Failure to do
so may result in a collision.
Turning On the Exterior Lights
To turn on the headlamps, parking lamps, side
markers, and tail lamps, use the rotary switch
that is to the left of the steering wheel.
82
The knob for the exterior lights
To turn on the parking lamps, tail lamps,
and license plate lamps, turn the knob
clockwise to the first position.
For more information about how the high
beams work, refer to the
Steering Column
Controls
chapter.
Summary of Contents for 1996 Continental
