manualshive.com logo in svg

Lincoln 1996 Continental, Owner'S Manual

The Lincoln 1996 Continental Owner's Manual is an essential guide for owners of this elegant vehicle. With a seamless blend of comfort and performance, this manual provides detailed instructions and maintenance tips. Download your free digital copy from manualshive.com to unleash the full potential of your Lincoln Continental.

Share
Download
background image

4. Check the coolant level following the

instructions on checking and adding coolant
to your engine, see the 

Engine Coolant 

in

the Index.  If you do not follow these
instructions, you or others could be injured.

If the coolant continues to overheat, have the

coolant system serviced as soon as possible.

Fuel Gauge

The fuel gauge displays approximately 

how

much fuel you have in the fuel tank.  The
ignition switch must be in the OFF position
while filling 

the 

tank with at least three gallons

(I I liters) for 

the fuel

 gauge to indicate the

new level.  If the ignition is left ON or less than

3 

gallons (I 1 liters) 

of fuel 

are added the fuel

gauge will not immediately indicate the new
fuel level.  The gauge will gradually correct
itself to indicate the true fuel level.

Overhead Console Warnings

If

 

your Continental is equipped with the Pressure

Alert System, a warning will appear in the overhead
console when the pressure in one of your vehicle's
tires drops below acceptable levels or if the system
has malfunctioned.

LOW TIRE

PRESSURE

See Securities 

in the 

Features 

chapter for more

information.

67

Summary of Contents for 1996 Continental


































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Continental

Ultra Start KE-6 Owner'S Manual preview
KE-6
Brand: Ultra Start Pages: 8
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
ULTIMATE SPEED 304669 Instructions For Use And Safety Manuallines preview
304669
Brand: ULTIMATE SPEED Pages: 50
EUFAB 16465 Operating Instructions Manual preview
16465
Brand: EUFAB Pages: 12
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
THIEYE CarView 2 User Manual preview
CarView 2
Brand: THIEYE Pages: 88
Scania Interlock 700 Series Instructions For Use Manual preview
Interlock 700 Series
Brand: Scania Pages: 82
Porsche BOXTER - Technical Manual preview
BOXTER -
Brand: Porsche Pages: 146
Porsche 928 GTS 1994 Owner'S Manual preview
928 GTS 1994
Brand: Porsche Pages: 127
Phonocell 6/821 Mounting Instructions preview
6/821
Brand: Phonocell Pages: 8
Volvo V70 2014 Quick Manual preview
V70 2014
Brand: Volvo Pages: 16
CITROEN CX 2000 Repair Manual preview
CX 2000
Brand: CITROEN Pages: 394
RAM TRUCK 2500 2017 Owner'S Manual Supplement preview
TRUCK 2500 2017
Brand: RAM Pages: 33
Kargo Master PRO-II KS Assembly Instructions Manual preview
PRO-II KS
Brand: Kargo Master Pages: 8
Toyota 2009 Tacoma Quick Reference Manual preview
2009 Tacoma
Brand: Toyota Pages: 22
Pinnacle EPL7SAM+C Series Quick Start Manual preview
EPL7SAM+C Series
Brand: Pinnacle Pages: 2
NanoCam Plus NANO CONNECT Smartview 72 Quick Start Manual preview
NANO CONNECT Smartview 72
Brand: NanoCam Plus Pages: 4
Fab Fours Z1550 Installation Manual preview
Z1550
Brand: Fab Fours Pages: 18

Brands by name

Popular brands

Load more brands