manualshive.com logo in svg

Lincoln 1996 Continental, Owner'S Manual

The Lincoln 1996 Continental Owner's Manual is an essential guide for owners of this elegant vehicle. With a seamless blend of comfort and performance, this manual provides detailed instructions and maintenance tips. Download your free digital copy from manualshive.com to unleash the full potential of your Lincoln Continental.

Share
Download
background image

9. Lug nut

The lug nuts on the wheel

7.

Place any ornaments in the trunk.

8.

Put the tire, jack, and wrench away.  Make
sure the jack is securely fastened so it does not
rattle when You drive.

9.

Unblock the wheels.

10.  Turn on the air suspension switch.

After replacing a flat tire with the temporary spare
tire, the flat tire can be secured in the trunk tub by
placing the "J" hook through a lug nut hole in the
wheel with the tire and wheel lying at an angle.

Anti-Theft Wheel Lug Nuts
(If equipped)

If your vehicle has this option, one of the lug nuts on
each wheel locks and must be unlocked with a special
key.  The key and registration card are attached to the
lug wrench and stored with the spare tire.  If you lose
the key, send the registration card to the manufacturer
(not the dealer) to get a replacement key.

NOTE:   

If entire lug wrench/lug nut key assembly is

lost, see Your nearest Ford Or Lincoln-Mercury
dealer who has access to a master set of keys.

DO NOT USE A POWER IMPACT WRENCH
ON THE LUG NUT KEY

209

Summary of Contents for 1996 Continental


































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Continental

Mazda 2011 Tribute Brochure & Specs preview
2011 Tribute
Brand: Mazda Pages: 4
GARO TWIN+ Assembly Instructions / End User Instruction preview
TWIN+
Brand: GARO Pages: 23
GARO LS4 Wallmounted Operational Instructions preview
LS4 Wallmounted
Brand: GARO Pages: 15
LAMBORGHINI URUS Quick Manual preview
URUS
Brand: LAMBORGHINI Pages: 48
Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
Whispbar K611W Fitting Instructions Manual preview
K611W
Brand: Whispbar Pages: 77
Xblitz Mirror 2016 User Manual preview
Mirror 2016
Brand: Xblitz Pages: 30
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
Brodit ProClip 854208 Manual preview
ProClip 854208
Brand: Brodit Pages: 2
Car-Systems Parktronic system Volkswagen Golf MK7 Assembly Manual preview
Parktronic system Volkswagen Golf MK7
Brand: Car-Systems Pages: 10
Saab 9000 1985 Service Manual preview
9000 1985
Brand: Saab Pages: 92
A-rival PNC70 Active Hardware Manual preview
PNC70 Active
Brand: A-rival Pages: 23
Black Horse Off Road TO20 Installation Instructions Manual preview
TO20
Brand: Black Horse Off Road Pages: 7
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
Lexus LS 460 2011 Owner'S Manual preview
LS 460 2011
Brand: Lexus Pages: 830
IOGear GBHFK201W6 User Manual preview
GBHFK201W6
Brand: IOGear Pages: 38

Brands by name

Popular brands

Load more brands