manualshive.com logo in svg

Lincoln 1996 Continental, Owner'S Manual

The Lincoln 1996 Continental Owner's Manual is an essential guide for owners of this elegant vehicle. With a seamless blend of comfort and performance, this manual provides detailed instructions and maintenance tips. Download your free digital copy from manualshive.com to unleash the full potential of your Lincoln Continental.

Share
Download
background image

To change the position of the steering wheel, pull
the release lever on the column toward you.  Tip
the steering wheel to the desired position.
Release the lever to lock the steering wheel in
place.

Speed Control

Your vehicle has speed control, so you can
automatically maintain a constant speed above 30
mph (48 km/h).  The switches to operate the
speed control are on the steering wheel.

Use of radio transmitting equipment that is not
Federal Communications Commission (FCC) or
in Canada the Canadian Radio and
Telecommunications Commission (CRTC)
approved may cause the speed control to
malfunction.  Therefore, use only properly
installed FCC (CRTC in Canada) approved radio
transmitting equipment in your vehicle.

NOTE:  

Since your vehicle has an Automatic

Overdrive Transaxle, you may want to drive in D
(Drive) when driving in hilly terrain, at higher
altitudes, or when pulling a trailer.  This will
improve speed control performance.

NOTE:  

Do not shift to N (Neutral) when using

the speed control.  This will cause the engine to
overspeed.

95

Summary of Contents for 1996 Continental


































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Continental

Panasonic SL-SX451C Operating Instructions preview
SL-SX451C
Brand: Panasonic Pages: 2
Panasonic CYRC50U - UNIVERSAL REAR-VIEW CAMERA Manual De Instrucciones preview
CYRC50U - UNIVERSAL REAR-VIEW CAMERA
Brand: Panasonic Pages: 20
Panasonic CF-WEB Series Setting Manual preview
CF-WEB Series
Brand: Panasonic Pages: 12
iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
Jeep GRAND CHEROKEE 2023 Information Manual preview
GRAND CHEROKEE 2023
Brand: Jeep Pages: 108
Jeep 2009 Wrangler Quick Reference Manual preview
2009 Wrangler
Brand: Jeep Pages: 12
Jeep 2008 Liberty Installation Instructions Manual preview
2008 Liberty
Brand: Jeep Pages: 6
OEM Audio Reference Series Manual preview
Reference Series
Brand: OEM Audio Pages: 29
Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Whispbar K896W Fitting Instructions Manual preview
K896W
Brand: Whispbar Pages: 15
Honda 08A28-0J6-800 Installation Instructions Manual preview
08A28-0J6-800
Brand: Honda Pages: 32
walser 30968 User Instructions preview
30968
Brand: walser Pages: 24
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
Yakima K1249 Instructions Manual preview
K1249
Brand: Yakima Pages: 9
MVG 0845 C Manual preview
0845 C
Brand: MVG Pages: 18
cam 40103 AL Mounting Instructions preview
40103 AL
Brand: cam Pages: 6
Abrams RE-47X Installation And Operation Manual preview
RE-47X
Brand: Abrams Pages: 12

Brands by name

Popular brands

Load more brands