manualshive.com logo in svg

Lincoln 1996 Continental, Owner'S Manual

The Lincoln 1996 Continental Owner's Manual is an essential guide for owners of this elegant vehicle. With a seamless blend of comfort and performance, this manual provides detailed instructions and maintenance tips. Download your free digital copy from manualshive.com to unleash the full potential of your Lincoln Continental.

Share
Download
background image

THIS DEVICE COMPLIES WITH FCC RULES,
PART 15.  OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS
DEVICE MAY NOT CAUSE HARMFUL
INTEREFERENCE AND (2) THIS DEVICE
MUST ACCEPT ANY INTEREFERENCE THAT
MAY BE RECEIVED, INCLUDING
INTEREFERENCE THAT MAY CAUSE
UNDESIRABLE OPERATION.

Maintenance Warning

The "Low Tire Pressure" warning will illuminate
and stay on when one of your vehicle's tires drops
below 18 psi (124 kps).  The warning light will also
come on and stay lit if the Pressure Alert System has
malfunctioned.

If this warning appears, check the pressure in your
tires at the earliest possible convenience and adjust
any tire that is low to the recommended air pressure
level.  This information can be found on 

the Service

Station Information 

page at the back of this manual

or on the driver's door placard.

If the warning remains on after you have
adjusted the tires to recommended air pressure
levels, take your vehicle to an authorized
Lincoln/Mercury dealer for service.

Flat Tire Warning

If the sensors detect a tire pressure lower than I
0 psi (68 kps), the "Low Tire Pressure" warning
will flash repeatedly in the overhead console and
the message "Warning Low Tire Pressure" will
be displayed in the Message Center, indicating
an impending flat tire.  If this condition occurs,
your Securitire requires service as soon as
possible.  Refer 

to Servicing Your Secutitires.

NOTE:  

The Pressure Alert System will

activate only when the vehicle is moving faster
than 10 mph (15 km/h).

143

Summary of Contents for 1996 Continental


































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Continental

Davis Instruments 8127 Installation Instructions Manual preview
8127
Brand: Davis Instruments Pages: 16
Daihatsu TERIOS J100 Maintenance Manual preview
TERIOS J100
Brand: Daihatsu Pages: 43
Eaton Green Motion Building Quick Start Manual preview
Green Motion Building
Brand: Eaton Pages: 12
Lange Originals HOIST-A-TOP JL CRANK Installation Instructions Manual preview
HOIST-A-TOP JL CRANK
Brand: Lange Originals Pages: 13
Yakima KingJoe 2 Quick Start Manual preview
KingJoe 2
Brand: Yakima Pages: 7
Yakima BowDown Quick Start Manual preview
BowDown
Brand: Yakima Pages: 6
Yakima LOCKN'LOAD Manual preview
LOCKN'LOAD
Brand: Yakima Pages: 10
Yakima HitchSki Quick Start Manual preview
HitchSki
Brand: Yakima Pages: 12
Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 2
Yakima K1005 Instructions Manual preview
K1005
Brand: Yakima Pages: 12
Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Brand: Porsche Pages: 144
Audiovox Prestige APS-45B Installation Manual preview
Prestige APS-45B
Brand: Audiovox Pages: 8
Volvo 1985 740 GL Owner'S Manual preview
1985 740 GL
Brand: Volvo Pages: 138
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
GMC 2013 GMC Savana Owner'S Manual preview
2013 GMC Savana
Brand: GMC Pages: 398
Atera 080 705 User Information preview
080 705
Brand: Atera Pages: 3
Black Horse RB001BK Installation Instructions preview
RB001BK
Brand: Black Horse Pages: 5

Brands by name

Popular brands

Load more brands