manualshive.com logo in svg

Lincoln 1996 Continental, Owner'S Manual

The Lincoln 1996 Continental Owner's Manual is an essential guide for owners of this elegant vehicle. With a seamless blend of comfort and performance, this manual provides detailed instructions and maintenance tips. Download your free digital copy from manualshive.com to unleash the full potential of your Lincoln Continental.

Share
Download
background image

Warning messages that have been reset are
divided into two categories.  They will
reappear on the display ten minutes from the
reset or they will not reappear until an ignition
OFF-ON cycle has been completed.  This
reappearing of warning messages is a reminder
that these warning conditions still exist within
the vehicle.

EIM

A press of this button allows you to change the
M/C and the Electronic Climate control unit
from English to Metric Units.  When you press
this button all displays change from English to
Metric or Metric to English units.  The
displays remain in the units you have chosen
until you change them again even after you
turn off the vehicle and start it again.

TRIP

Pressing this button will display the first of two
trip odometers.  Pressing it again will display
the second Trip Odometer.  Pressing RESET
will clear only that Trip odometer which is
displayed.

DTE/ECON

Pressing this button a first time will display
approximately how many miles you can drive before
you run out of fuel, or in other words the Distance
To Empty (DTE).  To ensure accuracy, turn the
ignition OFF when you fill the tank.

Pressing this button a second time will allow you to
display your Average Fuel Economy in miles/gallon
or Uters/100 kilometers.  Your WC computes this
figure using the distance traveled and rate of fuel
used information.  If you want to reset this feature,
press the RESET button while the Average Fuel
Economy feature is displayed.

NOTE:  

DTE (Distance to Empty) is calculated

using a "Running Average Fuel Economy" initialized
by the factory.  This value is not the same as the
Average Fuel Economy Display.  The Running
Average Economy is based on more than 500 miles
(800 km) of driving history.  Also the factory default
for Running Average Economy is reinitialized if the
battery is disconnected.

63

Summary of Contents for 1996 Continental


































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Continental

JAC S5 Workshop Manual preview
S5
Brand: JAC Pages: 70
GATmatic TWC-562S Installation, Operation & Maintenance Manual preview
TWC-562S
Brand: GATmatic Pages: 13
Vintage Air 561163 Manual preview
561163
Brand: Vintage Air Pages: 28
CARRYBOY CB-796IG2-CIGD-R Installation Manual preview
CB-796IG2-CIGD-R
Brand: CARRYBOY Pages: 4
GMC 2012 Terrain Owner'S Manual preview
2012 Terrain
Brand: GMC Pages: 428
Dakota Digital MCL-7000 Series Quick Start Manual preview
MCL-7000 Series
Brand: Dakota Digital Pages: 2
Volvo 2010 C30 Owner'S Manual preview
2010 C30
Brand: Volvo Pages: 284
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
VDO VIEWLINE 52 MM - MOUNTING 11-09 Installation Instructions preview
VIEWLINE 52 MM - MOUNTING 11-09
Brand: VDO Pages: 4
BMW E46/2 Coupe Manual preview
E46/2 Coupe
Brand: BMW Pages: 55
Whispbar K496W Fitting Instructions Manual preview
K496W
Brand: Whispbar Pages: 15
FALCON RIDGE BC-3400-FC05 Instructions For Installation And Care preview
BC-3400-FC05
Brand: FALCON RIDGE Pages: 7
Volvo 2004 C70 HPT User Manual preview
2004 C70 HPT
Brand: Volvo Pages: 30
Volvo 164 1969 Service Manual preview
164 1969
Brand: Volvo Pages: 266
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
Master Tailgaters MR-43E2DVR1 User Manual preview
MR-43E2DVR1
Brand: Master Tailgaters Pages: 10
Buick 1997 Skylark Owner'S Manual preview
1997 Skylark
Brand: Buick Pages: 371

Brands by name

Popular brands

Load more brands