
/!\ WARNING
Always replace a fuse with one that has the
specified amperage rating. Using a fuse with
a higher amperage rating can cause severe
wire damage and could start a fire.
5.
Align the edge of the cover with the edge of
the fuse panel and push the cover up until it
latches.
Even after you replace a fuse, it will continue to
blow if you do not find what caused the overload.
If the fuse continues to blow, have your electrical
system checked.
Lights and Bulb Replacement
It is a good idea to check the operation of the
following lights ftequently:
headlamps
high-mount brakelamp
tail lamps
brakelamps
hazard flasher
turn signals
side markers
license plate lamp
The alignment of your headlamps should be
checked if:
oncoming motorists frequently signal you to
turn off your vehicle's high beams when you do
not have the high beams on
the headlamps do not seem to give you enough
light to see clearly at night
277
Summary of Contents for 1996 Continental
