manualshive.com logo in svg

Lincoln 1996 Continental, Owner'S Manual

The Lincoln 1996 Continental Owner's Manual is an essential guide for owners of this elegant vehicle. With a seamless blend of comfort and performance, this manual provides detailed instructions and maintenance tips. Download your free digital copy from manualshive.com to unleash the full potential of your Lincoln Continental.

Share
Download
background image

/!\ WARNING

If you do not use the proper fuel cap, the
pressure in the fuel tank can damage the fuel
system or cause it to work improperly in a
collision.

NOTE:  

If you replace your fuel cap with an

aftermarket fuel filler cap, the customer warranty
may be void for any damage to the fuel tank and/or
fuel system.

Choosing the Right Fuel

Use only PREMIUM UNLEADED FUEL in your
vehicle.  Using leaded fuel is prohibited by federal
law.  Your warranty may not apply if your vehicle is
damaged because you used the wrong fuel.

Octane recommendations

The 4.6L engine is designed to operate on
premium fuel with an octane rating of 91 or
higher.  

Regular fuel with an octane rating of 87

240

may be used if necessary.  For optimum
performance, premium fuel is recommended.

Typical octane rating label

In some parts of the country, "premium" grade fuels
are sold with octane ratings of less than 91,
especially in high altitude areas.  It is recommended
that you use only those "premium" fuels with an
octane rating of 91 or higher.

Do not be concerned if your vehicle sometimes
knocks lightly when you drive up a hill or when you
accelerate.  However, see your dealer or a qualified
service technician if persistent, heavy knocking
occurs because this can damage the engine.

Summary of Contents for 1996 Continental


































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Continental

Q'STRAINT QLK-150 Installation Instructions Manual preview
QLK-150
Brand: Q'STRAINT Pages: 10
JANE be cool boosty Manual preview
be cool boosty
Brand: JANE Pages: 21
Kuda 079020 Installation Instruction preview
079020
Brand: Kuda Pages: 2
Xhorse VVDI User Manual preview
VVDI
Brand: Xhorse Pages: 48
Prorack WHISPBAR S53 Fitting Instructions For Basic Carrier preview
WHISPBAR S53
Brand: Prorack Pages: 10
J. Strong JST506BT Installation Instructions preview
JST506BT
Brand: J. Strong Pages: 2
Kleinn RS-GM6 Installation Manual preview
RS-GM6
Brand: Kleinn Pages: 8
Arrista SG8-19 Installation Manual preview
SG8-19
Brand: Arrista Pages: 2
Lexus 2015 LX 570 Settings User Manual preview
2015 LX 570
Brand: Lexus Pages: 6
Yakima K682 Instructions Manual preview
K682
Brand: Yakima Pages: 10
Chevrolet 2001 Cavalier Owner'S Manual preview
2001 Cavalier
Brand: Chevrolet Pages: 357
Kia Soul 2018 Owner'S Manual preview
Soul 2018
Brand: Kia Pages: 673
PAC RPK4-CH4102 Manual preview
RPK4-CH4102
Brand: PAC Pages: 18
U.S. General 95187 Instruction Sheet preview
95187
Brand: U.S. General Pages: 3
Vauxhall Signum Owner'S Manual preview
Signum
Brand: Vauxhall Pages: 310
Whispbar K536W Fitting Instructions Manual preview
K536W
Brand: Whispbar Pages: 17
Discount Car Stereo A2DIY-CHRY Installation Manual preview
A2DIY-CHRY
Brand: Discount Car Stereo Pages: 5
Honda 2012 Pilot Owner'S Manual preview
2012 Pilot
Brand: Honda Pages: 682

Brands by name

Popular brands

Load more brands