Lighthouse Raymarine gS 195, Installation And Operation Instruction Manual

Page: 58 / 440

Sonar variant multifunction display connection
The gS Series multifunction display can also be
networked to Raymarine multifunction display that
has a built-in sonar module.
SeaTalk
hs
/ RayNet
4
3
D12898-1
1 2
1. gS multifunction display.
2. Sonar Variant multifunction display (e.g. e97).
3. Sonar transducer cable.
4. Sonar transducer.
Multiple sonar modules
Up to 3 sonar modules can be connected on the
same network, you must select which sonar module
you want to use as only 1 sonar module can be
viewed on the multifunction display at any one time.
SeaTalk
hs
/ RayNet
SeaTalk hs / RayNet
SeaTalk hs / RayNet
D1301 1-1
1
2
4
5
3
3
3
1. Multifunction display rear connector panel.
2. network switch.
3. RayNet network cables.
4. CP450C CHIRP sonar module
5. CP100 DownVision TM sonar module
Sonar variant multifunction displays
The table below details which multifunction display
variants feature a built-in sonar module and can be
connected directly to compatible sonar transducers.
Non-sonar
variants
Sonar variants
DownVision TM
variants
a65 a67 a68
a65 Wi-Fi a67 Wi-Fi a68 Wi-Fi
a75 a77 a78
a75 Wi-Fi a77 Wi-Fi a78 Wi-Fi
a95 a97 a98
a125 a127 a128
e7 e7D
c95 c97
c125 c127
e95 e97
e125 e127
e165
Important software requirements for multiple
sonar systems
If your system includes more than one source of
sonar data you must ensure that any CP300 or
CP450C sonar modules are running software version
v4.04 or later.
This applies to systems which include:
• Any number of MFD(s) with an internal sonar
module plus a CP300 and / or CP450C sonar
module; or
• No MFD(s) with an internal sonar module, but
more than one CP300 or CP450C sonar module.
This does NOT apply to any systems that do NOT
include a CP300 or CP450C sonar module.
Note: For software downloads and instructions
on how to update the software for your product(s),
visit
www.raymarine.com/software .
58
gS Series