Lighthouse Raymarine gS 195, Installation And Operation Instruction Manual

Page: 13 / 440

uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment
and receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio / TV
technician for help.
Industry Canada
This device complies with Industry Canada
License-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference; and
2. This device must accept any interference,
including interference that may cause undesired
operation of the device.
This Class B digital apparatus complies with
Canadian ICES-003.
Industry Canada (Français)
Cet appareil est conforme aux normes d'exemption
de licence RSS d'Industry Canada.
Son fonctionnement est soumis aux deux conditions
suivantes:
1. cet appareil ne doit pas causer d'interférence, et
2. cet appareil doit accepter toute interférence,
notamment les interférences qui peuvent affecter
son fonctionnement.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
Japanese approvals
In the frequency band used for this device, campus radio
stations (radios stations that require a license) and specified
low power radio stations (radio stations that do not require
license) for mobile identification and amateur radio stations
(radio stations that require license) used in industries such as
microwave ovens, scientific, medical equipment devices and
production line of other factories are also being operated.
1. Before using this device, please make sure that campus
radio stations and specified low power radio stations for
mobile identification and amateur radio stations are not
being operated nearby.
2. In case there is any case of harmful interference to
campus radio stations for mobile identification caused by
this device, please immediately change the frequency
used or stop the transmission of radio waves and then
consult about the measures to avoid interference (for
example, the installation of partitions) through the contact
information below.
3. Besides, when in trouble, such as when there is any
case of harmful interference to specified low power
radio stations for mobile identification or amateur radio
stations caused by this device, please consult through
the following contact information.
Contact information: Please contact your local authorized
Raymarine dealer.
Third party software license
agreements
This product is subject to certain third party software
license agreements as listed below:
• GNU — LGPL/GPL
• JPEG libraries
• OpenSSL
• FreeType
The license agreements for the above can be found
on the website
www.raymarine.com and on the
accompanying documentation CD if supplied.
Suppression ferrites
Raymarine cables may be fitted with suppression
ferrites. These are important for correct EMC
performance. If a ferrite has to be removed for any
purpose (e.g. installation or maintenance), it must be
replaced in the original position before the product
is used.
Use only ferrites of the correct type, supplied by
Raymarine authorized dealers.
Where an installation requires multiple ferrites to be
added to a cable, additional cable clips should be
used to prevent stress on the connectors due to the
extra weight of the cable.
Important information
13