Lighthouse Raymarine gS 195, Installation And Operation Instruction Manual

Page: 55 / 440

4.9 Radar connection
The multifunction display is compatible with
Raymarine Non-HD digital radomes and HD /
SuperHD radar scanners. The scanner is connected
using over SeaTalk
hs .
The radar is usually connected via a Raymarine
network switch. On smaller systems (with only
3 network devices) the radar may be connected
directly to the display.
Radar connected using Raymarine network
switch
D12894-1
4
2 1
5
6
3
1. Radar scanner.
2. Raymarine network switch.
3. gS multifunction display.
4. RayNet radar cable.
5. VCM (Voltage Converter Module) — required
for Open Arrays .
6. Power connection.
Radar connected directly to the display
D12895-1
2
4
3
1
1. Radar scanner
2. Multifunction display rear connector panel.
3. RayNet Radar cable.
4. Connection to power supply — Open array
scanners require a VCM (Voltage Converter
Module).
RJ45 SeaTalk hs Radar cable connection
To connect a Radar using an RJ45 SeaTalk hs radar
cable additional accessories are required.
1
2
3
D12884-1
1. RJ45 SeaTalk hs Radar cable.
2. RayNet to RJ45 SeaTalk hs adaptor cable.
3. SeaTalk hs crossover coupler.
Radar cable extension
For longer cable runs a radar power and data digital cable extension is required.
Cables and connections 55