Lighthouse Raymarine gS 195, Installation And Operation Instruction Manual

Page: 69 / 440

4.25 Media player connection
You can use your multifunction display to wirelessly
control a Bluetooth-compatible media player (such
as a smartphone).
The media player must be compatible with the
Bluetooth AVRCP protocol (version 2.1 or higher).
D12917-1
1 3 2
1. Multifunction display.
2. Bluetooth connection.
3. Bluetooth-compatible media player.
To use this feature you must first:
• Enable Bluetooth in the System Settings on the
multifunction display.
• Enable Bluetooth on the media player device.
• Pair the media player device with the multifunction
display.
• Enable Audio Control in the System Settings on
the multifunction display.
You can also connect an RCU-3 remote and assign
the shortcut key to Start/Stop audio playback
Note: If your media player does not include built-in
speakers it may be necessary to connect the media
player's audio output to an external audio system
or a pair of headphones. For more information
refer to the instructions that accompany the media
player device.
Enabling Bluetooth
With the homescreen displayed:
1. Select
Set-up .
2. Select System Settings .
3. Select Wireless Connections .
4. Select Bluetooth > On .
Pairing a Bluetooth media player
With the homescreen displayed and Bluetooth turned
on:
1. Select
Set-up .
2. Select System Settings .
3. Select Wireless Connections .
4. Select New Bluetooth Connection .
A message is displayed prompting you to put
your media player device into discovery mode.
5. Ensure Bluetooth is enabled on your external
media player device and ensure it is ready to
be paired. For more information, consult the
instructions that accompany the device.
6. On the multifunction display, select OK in the
message dialog.
The multifunction display will search for active
Bluetooth devices.
7. Select Stop Discovery when your device
appears in the list.
8. Select the media player device in the list.
A pairing request message is displayed on the
external media device.
9. On the external media device, select Pair
(or equivalent) to accept the pairing request
message.
The multifunction display shows a message
asking you to confirm the Pairing code.
10. If the pairing code displayed on the multifunction
display matches the code displayed on the
external media device, select
Ok on the
multifunction display. If the code does NOT
match, repeat steps 4 to 8.
11. If the pairing was successful the multifunction
display will confirm the pairing.
The external media device is now paired with the
multifunction display.
Enabling audio control
With the homescreen displayed:
1. Select
Set-up .
2. Select System Settings .
3. Select Wireless Connections .
4. Select Connection Manager .
5. Select the media player device in the list.
6. Select
Audio Control > On .
Media player controls
Touchscreen multifunction displays enable you to
use the on-screen media player controls to control
the audio playing on your external media player.
D12293-1
1
3 2 4 5
1. Touch this icon to display the audio controls.
2. Previous track.
3. Play track.
4. Pause track.
5. Next track.
Cables and connections 69