14
The Basics
While encrypting, you cannot access other functions.
Do not connect the USB Cable while encrypting.
Do not take out the microSD card while encrypting.
Do not take out the battery while encrypting.
Do not press the
Power/Lock Key
while encrypting.
While encrypting the phone, your phone will reboot several times.
If you encode the microSD card then perform a factory reset, you
cannot access encrypted data in the microSD card.
Do not unplug your charger while encrypting the phone.
After encrypting the phone or the microSD card, the screen lock settings
None
,
Swipe
,
Face Unlock
, or
Pattern
are not available to secure your
device.
Charging the Phone
Your phone comes with a Wall Charger and a USB Cable which connect
together to charge your phone. To charge your phone:
NOTICE
Please use only an approved charging accessory to charge your phone.
Improper handling of the USB/Charger Port, as well as the use of an incompatible
charger, may cause damage to your phone and void the warranty.
1. Connect the USB Cable into the Wall Charger.
Correctly orient the USB Cable with the Wall Charger. As shown below,
the LG logo on the USB Cable will face toward you and the LG logo on
the Wall Charger will face away from you.
USB Cable
Wall Charger
2. Plug the USB Cable (as shown below) into the phone’s USB/Charger
Port, then plug it in to an electrical outlet to begin charging.
NOTE
Correctly orient the USB Cable with the phone's port. The USB logo on the USB Cable
should face upward.