Lexmark X792 7562-4xx, Service Manualv

Page: 265 / 855

Diagnostic aids
3-27
7562
Go Back
Previous
Next
Fuser Temp
Warning: This setting should not be changed without specific instructions from the next level of support.
DC Charge Adjustment
Warning: This setting should not be changed without specific instructions from the next level of support.
Dev Bias Adj
Warning: This setting should not be changed without specific instructions from the next level of support.
Transfer Adjust
Warning: This setting should not be changed without specific instructions from the next level of support.
Op Point Boost
Warning: This setting should not be changed without specific instructions from the next level of support.
EVENT LOG
Display Log
Display Log shows the message that appeared on the operator panel for each event in the log, starting with the
most recent. Use the touch-screen arrows to scroll through the log entries. To see more in-depth information
about each event, print the event log using the Print Log menu item.
Touch Back to return to the EVENT LOG menu.
Print Log
The Print Log menu item prints a detailed report of each event in the log. The first page of the event log contains
a Printer Information section similar to what is printed on a Menu Setting Page. Printed at the top of each page is
the model name and serial number to assist in tracking each page of a report to a specific printer. The printout of
the log contains the following information for each error in the log:
•
Page count when the error occurred (except for 900 service RIP software errors).
•
Code versions of all packages when error occurred.
•
Panel message when error occurred (except for 900 service RIP software errors).
•
Debug information and secondary error codes, depending on the error.
The Clear Log operation clears out the errors that print in this report. The errors listed in the Display Log
operation do not necessarily match in number nor in order with the errors from the printer log.
Note: This log can be printed from the Configuration Menu, but the debug and secondary error codes are not
printed on this log.
Clear Log
This menu item deletes the event log. Once the event log is deleted, the only item remaining on the log is the
“Clear Log” event.
Touch Back to return to the EVENT LOG menu.