Lexmark MX-C357F User Manual Download Page 174

Page: 174 / 208

Action

Yes

Step 3

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting on the printer control
panel. Navigate to

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Do vertical dark lines or streaks appear on prints?

Go to step 4.

The problem is
solved.

Step 4

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you use it.

Print the document.

Do vertical dark lines or streaks appear on prints?

Contact your

dealer

. The problem is

solved.

Horizontal white lines

Notes:

•

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

to navigate through the settings.

•

If horizontal white lines keep appearing on your prints, then see the “Repeating defects” topic.

Troubleshooting

174

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands