Lexmark MX-C357F User Manual Download Page 123

Page: 123 / 208

Erasing printer hard disk memory

From the control panel, navigate to:

Settings

Device

Maintenance

Out of Service Erase

Sanitize all information on hard disk

For non-touch-screen printer models, press

to navigate through the settings.

Depending on your printer model, select

ERASE

Continue

Follow the instructions on the display.

Note:

This process can take from several minutes to more than an hour, making the printer unavailable

for other tasks.

Encrypting the printer hard disk

This process erases all contents in the hard disk. If necessary, back up important data from the printer before
starting the encryption.

From the control panel, navigate to:

Settings

Security

Disk Encryption

Start encryption

For non-touch-screen printer models, press

to navigate through the settings.

Follow the instructions on the display.

Notes:

•

To avoid loss of data, do not turn off the printer during the encryption process.

•

This process can take from several minutes to more than an hour, making the printer unavailable for
other tasks.

•

After encryption, the printer automatically restarts.

Restoring factory default settings

From the control panel, navigate to:

Settings

Device

Restore Factory Defaults

For non-touch-screen printer models, press

to navigate through the settings.

In the Restore Settings menu, select the settings that you want to restore.

Select

RESTORE

Follow the instructions on the display.

Securing the printer

123

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands