Lexmark MX-C357F User Manual Download Page 38

Page: 38 / 208

Copying multiple pages onto a single sheet

Load an original document into the ADF tray or on the scanner glass.

From the control panel, navigate to:

Copy

Settings

Pages Per Side

For non-touch-screen printer models, press

to navigate through the settings.

Adjust the settings.

Copy the document.

Creating a copy shortcut

Note:

You may need administrative rights to create a shortcut.

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Shortcuts

Add Shortcut

From the Shortcut Type menu, select

Copy

, and then conﬁgure the settings.

Apply the changes.

Copying

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands