Lexmark MX-C357F User Manual Download Page 24

Page: 24 / 208

Loading the manual feeder

Adjust the guide to match the size of the paper that you are loading.

Load a sheet of paper with the printable side facedown.

•

Load letterhead with the printable side facedown and the top edge entering the printer ﬁrst for one

‑

sided

printing.

•

Load letterhead with the printable side faceup and the top edge entering the printer last for two

‑

sided

printing.

•

Load envelope with the ﬂap side up and against the right side of the paper guide.

Feed the paper until its leading edge gets pulled in.

Warning—Potential Damage:

To avoid paper jams, do not force paper into the manual feeder.

Linking trays

Open a web browser, and then type the printer IP address in the address ﬁeld.

Loading paper and specialty media

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Lexmark MX-C357F, User Manual, Page: 24 / 208

Search results

Summary of Contents for MX-C357F

Reviews: