Lexmark MX-C357F User Manual Download Page 191

Page: 191 / 208

Compare the Copy Quick Test page with the original document.

Note:

If the margins of the test page are different from the original document, then adjust Left Margin and

Top Margin.

Repeat

step 4

and

step 5

until the margins of the Copy Quick Test page closely match the original document.

Adjusting ADF registration

From the control panel, navigate to:

Settings

Maintenance

Conﬁguration Menu

Scanner Conﬁguration

Scanner Manual Registration

For non-touch-screen printer models, press

to navigate through the settings.

From the Print Quick Test menu, select

Start

Place the Print Quick Test page on the ADF tray.

Select

Front ADF Registration

Rear ADF Registration

Notes:

•

To align Front ADF Registration, place the test page faceup, short edge ﬁrst into the ADF.

•

To align Rear ADF Registration, place the test page facedown, short edge ﬁrst into the ADF.

From the Copy Quick Test menu, select

Start

Compare the Copy Quick Test page with the original document.

Note:

If the margins of the test page are different from the original document, then adjust Horizontal

Adjust and Top Margin.

Repeat

step 5

and

step 6

until the margins of the Copy Quick Test page closely match the original document.

Contacting your dealer

Before contacting your dealer, make sure to have the following information:

•

Printer problem

•

Error message

•

Printer model type and serial number

Visit the place where you purchased your printer.

Troubleshooting

191

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands