Lexmark MX-C357F User Manual Download Page 32

Page: 32 / 208

Select a printer.

If necessary, adjust the settings.

Print the document.

Printing from a mobile device using Wi

‑

Fi Direct®

‑

Fi Direct

is a printing service that lets you print to any Wi

‑

Fi Direct

‑

ready printer.

Note:

Make sure that the mobile device is connected to the printer wireless network. For more information,

see

“Connecting a mobile device to the printer wireless network” on page 126

From your mobile device, launch a compatible application or select a document from your ﬁle manager.

Depending on your mobile device, do one of the following:

•

Tap

Print

•

Tap

Print

•

Tap

Print

Select a printer, and then adjust the settings, if necessary.

Print the document.

Printing from a ﬂash drive

Insert the ﬂash drive.

Notes:

•

If you insert the ﬂash drive when an error message appears, then the printer ignores the ﬂash drive.

•

If you insert the ﬂash drive while the printer is processing other print jobs, then

Busy

appears on the

display.

Select the document that you want to print.

If necessary, conﬁgure other print settings.

Printing

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands