Lexmark MX-C357F User Manual Download

Page: 77 / 208

Advanced Imaging

Menu item

Description

Color Balance

Cyan (0*)

Magenta (0*)

Yellow (0*)

Adjust the color intensity for cyan, magenta, and yellow.

Color Dropout

Color Dropout (None*)

Default Red Threshold (128*)

Default Green Threshold (128*)

Default Blue Threshold (128*)

Specify which color to drop during scanning, and adjust the dropout
setting for that color.

Auto Color Detect

Color Sensitivity (5*)

Area Sensitivity (5*)

Conﬁgure the auto color detection setting.

Contrast

Best for content*

0–5

Specify the contrast for the scanned image.

Background Removal

Background Detection (Content

‑

based*)

Level (0*)

Remove the background color or image noise from the original
document.

Notes:

•

Content-based removes the background color from the original
document .

•

Fixed removes image noise from a photo.

Auto Center

Off*

Align the content at the center of the page.

Mirror Image

Off*

Create a mirror image of the original document.

Negative Image

Off*

Create a negative image of the original document.

Shadow Detail

‑

4 to 4 (0*)

Adjust the shadow detail in the original document.

Scan Edge to Edge

Off*

Scan the original document from edge to edge.

Sharpness

1–5 (3*)

Adjust the sharpness of the scanned image.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands