Lexmark MX-C357F User Manual Download

Page: 184 / 208

The print appears tinted

Action

Yes

Step 1

Perform Color Adjust.

From the control panel, navigate to:

Settings

Print

Quality

Advanced Imaging

Color Adjust

For non-touch-screen printer models, press

to navigate

through the settings.

Print the document.

Does the print appear tinted?

Go to step 2.

The problem is
solved.

Step 2

From the control panel, navigate to:

Settings

Print

Quality

Advanced Imaging

Color

Balance

For non-touch-screen printer models, press

to navigate

through the settings.

Adjust the settings.

Print the document.

Does the print appear tinted?

Contact your

dealer

. The problem is

solved.

Faxing problems

Cannot send or receive faxes

Action

Yes

Step 1

Resolve any error messages that appear on the display.

Can you send or receive a fax?

The problem is
solved.

Go to step 2.

Step 2

Make sure that the cable connections for the following equipment
are secure:

•

Telephone

•

Handset

•

Answering machine

Can you send or receive a fax?

The problem is
solved.

Go to step 3.

Troubleshooting

184

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands