Lexmark MX-C357F User Manual Download Page 13

Page: 13 / 208

Using the control panel

Panel with 4.3

‑

inch touch

‑

screen display

Use the

Display

•

View the printer messages and supply status.

•

Set up and operate the printer.

Home button

Go to the home screen.

Numeric keypad

Enter numbers or symbols in an input ﬁeld.

Power button

•

Turn on or turn off the printer.

Note:

To turn off the printer, press and hold the power button for ﬁve

seconds.

•

Set the printer to Sleep or Hibernate mode.

•

Wake the printer from Sleep or Hibernate mode.

Clear all or Reset button Reset the default settings of a function such as copying, faxing, or scanning.

Stop or Cancel button

Stop the current printer task.

Start button

Start a job, depending on which mode is selected.

Pause button

Place a dial pause in a fax number.

Backspace button

Move the cursor backward and delete a character in an input ﬁeld.

Indicator light

Check the printer status.

Volume buttons

Adjust the speaker volume.

Understanding the status of the power button and
indicator light

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blue

The printer is ready or processing data.

Using the control panel

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands