Lexmark MX-C357F User Manual Download Page 51

Page: 51 / 208

Select

Scan to USB

and adjust the settings if necessary.

Note:

If the USB Drive screen does not appear, then select

USB Drive

on the control panel.

Scan the document.

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the ﬂash drive or

the printer in the area shown while actively printing, reading, or writing from the memory device.

Sending scanned documents to a computer

Load an original document into the ADF tray or on the scanner glass.

From the control panel, navigate to:

Scan Proﬁles

Scan to Computer

For non-touch-screen printer models, press

to navigate through the settings.

Select the scan proﬁle where you want to save the document.

Scanning

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands