Lexmark MX-C357F User Manual Download Page 23

Page: 23 / 208

Flex, fan, and align the paper edges before loading.

Load paper with the printable side facedown.

•

Load letterhead with the printable side facedown and the top edge entering the printer ﬁrst for one

‑

sided

printing.

•

Load letterhead with the printable side faceup and the top edge entering the printer last for two

‑

sided

printing.

•

Load envelopes with the ﬂap side up and against the right side of the paper guide.

Warning—Potential Damage:

Do not use envelopes with stamps, clasps, snaps, windows, coated

linings, or self

‑

stick adhesives.

From the control panel, set the paper size and paper type to match the paper loaded.

Loading paper and specialty media

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands