Lexmark MX-C357F User Manual Download Page 41

Page: 41 / 208

Faxing

Setting up the printer to fax

Notes:

•

The following connection methods are applicable only in some countries or regions.

•

During the initial printer setup, clear the fax function check box and any other function you plan to set up
later, and then touch

Continue

•

The indicator light may blink red if the fax function is enabled and not fully set up.

Warning—Potential Damage:

Do not touch cables or the printer in the area shown while actively sending or

receiving a fax.

Conﬁguring the SMTP server for fax

Note:

In some printer models, this setting can be conﬁgured only from the Embedded Web Server.

From the control panel

From the control panel, navigate to:

Settings

Fax

Fax Server Setup

Fax Server E

‑

mail Settings

Conﬁgure the settings.

Note:

To use the SMTP server settings for e

‑

mail, enable

Use E

‑

mail SMTP Server

From the Embedded Web Server

Open a web browser, and then type the printer IP address in the address ﬁeld.

Faxing

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands