Lexmark MX-C357F User Manual Download Page 127

Page: 127 / 208

Settings

Network/Ports

Wireless

Enable Wi

‑

Fi Direct

For non-touch-screen printer models, press

to navigate through the settings.

Notes:

•

The Wi

‑

Fi Direct SSID and password are generated automatically. To view the Wi

‑

Fi Direct SSID and

password, go to the Wi

‑

Fi Direct menu.

•

You can also change the SSID and password, if necessary.

Connect your mobile device to the printer wireless network.

Deactivating the Wi

‑

Fi network

From the printer control panel, navigate to:

Settings

Network/Ports

Network Overview

Active Adapter

Standard Network

For non-touch-screen printer models, press

to navigate through the settings.

Follow the instructions on the display.

Cleaning printer parts

Cleaning the printer

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock when cleaning the exterior of the

printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.

Notes:

•

Perform this task after every few months.

•

Damage to the printer caused by improper handling is not covered by the printer warranty.

Turn off the printer, and then unplug the power cord from the electrical outlet.

Remove paper from the standard bin and multipurpose feeder.

Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

Wipe the outside of the printer with a damp, soft, lint

‑

free cloth.

Notes:

•

Do not use household cleaners or detergents, as they may damage the ﬁnish of the printer.

•

Make sure that all areas of the printer are dry after cleaning.

Connect the power cord to the electrical outlet, and then turn on the printer.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Maintaining the printer

127

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands