Lexmark MX-C357F User Manual Download

Page: 25 / 208

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Settings

Paper

Tray Conﬁguration

Set the same paper size and paper type for the trays that you are linking.

Save the settings.

Click

Settings

Device

Maintenance

Conﬁguration Menu

Tray Conﬁguration

Set Tray Linking to

Automatic

Save the settings.

To unlink trays, make sure that no trays have the same paper size and paper type settings.

Warning—Potential Damage:

The temperature of the fuser varies according to the speciﬁed paper type. To

avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.

Loading paper and specialty media

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands