Lenovo ThinkServer RD230, Software User'S Manual

Page: 180 / 364

5-10 MegaRAID Command Tool
5.4.7 Set Factory Defaults
Use the command in Table 5.9 to set the factory defaults on the selected
controller(s).
5.4.8 Set SAS Address
Use the command in Table 5.10 to set the SAS address on the selected
controller(s).
5.4.9 Set Time and Date on Controller
Use the command in Table 5.11 to set the time and date on the selected
controller(s).
Table 5.8 Display Specified Controller Properties
Convention
MegaCli –AdpGetProp CacheFlushInterval | RebuildRate | PatrolReadRate|
BgiRate | CCRate | ReconRate | SpinupDriveCount | SpinupDelay |
CoercionMode | PredFailPollInterval | ClusterEnable | BatWarnDsbl |
EccBucketSize | EccBucketLeakRate | EccBucketCount | AlarmDsply |
AbortCCOnError | AutoDetectBackPlaneDsbl | CopyBackDsbl |
LoadBalanceMode | SMARTCpyBkEnbl | SSDSMARTCpyBkEnbl |
MaintainPdFailHistoryEnbl | EnblSpinDownUnConfigDrvs |
EnblSSDPatrolRead | NCQDsply | UseFDEOnlyEncrypt | WBSupport |
AutoEnhancedImportDsply | PrCorrectUncfgdAreas -aN|
-a0,1,2|-aALL
Description Displays the properties on the selected controller(s).
EccBucketCount
: Count of single-bit ECC errors currently in the bucket.
See Table 5.7 for explanations of the other options.
Table 5.9 Set Factory Defaults
Convention
MegaCli -AdpFacDefSet -aN|-a0,1,2|-aALL
Description Sets the factory defaults on the selected controller(s).
Table 5.10 Set SAS Address on Controller
Convention
MegaCli –AdpSetSASA str[0-64] -aN
Description Sets the controllers SAS address. This string must be a 64-digit hexadecimal
number.