Lenovo ThinkServer RD230, Software User'S Manual

Page: 238 / 364

6-30 MegaRAID Storage Manager Overview and Installation
6.6.2.5 Configuring snmpd.conf
By default, SNMP queries (walk, get) can be executed from any remote
machine without any changes to the
snmpd.conf
file. To quickly add a
new community and client access, perform the following steps:
1. Stop the SMA service by executing the following command:
# svcadm disable svc:/application/management/sma:default
2. Add read-only and read-write community names.
a. Add a read-only community name and client/hostname/ipaddress
under "SECTION: Access Control Setup" in the
/etc/sma/snmp/snmpd.conf
file, as shown in the following
excerpt:
– #################################################
– # SECTION: Access Control Setup
– #This section defines who is allowed to talk to your
# running SNMP Agent.
– # rocommunity: a SNMPv1/SNMPv2c read-only access
– # community name
– # arguments: community
– # [default|hostname|network/bits] [oid]
– # rocommunity snmpclient 172.28.157.149
– #################################################
b. Add a readwrite community name and client/hostname/ipaddress
under "SECTION: Access Control Setup" in
/etc/sma/snmp/snmpd.conf
file, as shown in the following
excerpt:
– #################################################
– # SECTION: Access Control Setup
– # This section defines who is allowed to talk to your
# running
– # snmp agent.
– # rocommunity: a SNMPv1/SNMPv2c read-only access
– # community name