Lenovo ThinkServer RD230, Software User'S Manual

Page: 337 / 364

A-3
0x001c Information Flush rate changed to %d seconds
0x001d Information Hibernate command received from host
0x001e Information Event log cleared
0x001f Information Event log wrapped
0x0020 Fatal Multi-bit ECC error: ECAR=%x, ELOG=%x, (%s)
0x0021 Warning Single-bit ECC error: ECAR=%x, ELOG=%x, (%s)
0x0022 Fatal Not enough controller memory
0x0023 Information Patrol Read complete
0x0024 Information Patrol Read paused
0x0025 Information Patrol Read Rate changed to %d%%
0x0026 Information Patrol Read resumed
0x0027 Information Patrol Read started
0x0028 Information Rebuild rate changed to %d%%
0x0029 Information Drive group modification rate changed to %d%%
0x002a Information Shutdown command received from host
0x002b Information Test event: %s
0x002c Information Time established as %s; (%d seconds since power on)
0x002d Information User entered firmware debugger
0x002e Warning Background Initialization aborted on %s
0x002f Warning Background Initialization corrected medium error (%s at
%lx
0x0030 Information Background Initialization completed on %s
0x0031 Fatal Background Initialization completed with uncorrectable
errors on %s
0x0032 Fatal Background Initialization detected uncorrectable double
medium errors (%s at %lx on %s)
0x0033 Critical Background Initialization failed on %s
0x0034 Progress Background Initialization progress on %s is %s
0x0035 Information Background Initialization started on %s
0x0036 Information Policy change on %s from %s to %s
0x0038 Warning Consistency Check aborted on %s
0x0039 Warning Consistency Check corrected medium error (%s at %lx
Table A.2 Event Messages (Cont.)
Number Type Event Text
(Sheet 2 of 13)