Lenovo ThinkServer RD230, Software User'S Manual

Page: 335 / 364

MegaRAID SAS Software User Guide A-1
Appendix A
Events and Messages
This appendix lists the MegaRAID Storage Manager events that may
appear in the event log.
MegaRAID Storage Manager software monitors the activity and
performance of all controllers in the workstation and the devices attached
to them. When an event occurs, such as the start of an initialization, an
event message appears in the log at the bottom of the MegaRAID
Storage Manager window.
Each message that appears in the event log has an error level that
indicates the severity of the event, as shown in
Table A.1 .
Table A.2 lists all of the MegaRAID Storage Manager event messages.
The event message descriptions include placeholders for specific values
that are determined when the event is generated. For example, in
message No. 1 in the Event Messages table, “%s” is replaced by the
firmware version, which is read from the firmware when the event is
generated.
Table A.1 Event Error Levels
Error Level Meaning
Information Informational message. No user action is necessary.
Warning Some component may be close to a failure point.
Critical A component has failed, but the system has not lost data.
Fatal A component has failed, and data loss has occurred or will
occur.