Lenovo ThinkServer RD230, Software User'S Manual

Page: 233 / 364

Installing and Configuring an SNMP Agent 6-25
a. To start the tog-pegasus server, execute the following command:
# /etc/init.d/tog-pegasus restart
b. To start ThinkServerSASSever, execute the following command:
# /etc/init.d/ThinkServerSASd restart
6.5.2 Installing a CIM SAS Storage Provider on Windows
Perform the following steps to install a CIM SAS Storage Provider on a
Windows system.
1. Go To DISK1.
2. Run
setup.exe
.
The installer installs all of the necessary files and the MOF, and
registers the COM dll. The Provider is now ready to use.
Perform the following steps to uninstall a CIM SAS Storage Provider on
a Windows system.
1. Go to Control Panel > Add/Remove Program .
2. Remove the ThinkServer WMI SAS Provider Package.
This step removes all of the necessary files, uninstalls the MOF, and
unregisters the COM dll. The SAS Provider is no longer on the
system.
6.6 Installing and Configuring an SNMP Agent
A Simple Network Management Protocol (SNMP)-based management
application can monitor and manage devices through SNMP extension
agents. The MegaRAID SNMP subagent reports the information about
the RAID controller, virtual drives, physical devices, enclosures, and
other items per SNMP request. The SNMP application monitors these
devices for issues that might require administrative attention.
The following procedure describes how to install and un-install the
ThinkServer CIM SAS Storage Provider on a system running on a Windows
operating system.