Lenovo ThinkServer RD230, Software User'S Manual

Page: 305 / 364

Configuring Alert Notifications 9-5
•
Load all of the values from a previously saved backup into the dialog
to edit or send to the monitor.
Note: When you load a saved backup file, all unsaved changes
made in the current session will be lost.
You can select the Email tab to perform the following actions:
•
Add new email addresses for recipients of alert notifications.
•
Send test messages to the recipient email addresses.
•
Remove email addresses of recipients of alert notifications.
•
Save an .xml backup file of the entire alert configuration.
•
Load all of the values from a previously saved backup into the dialog
to edit or send to the monitor.
Note: When you load a saved backup file, all unsaved changes
made in the current session will be lost.
9.2.1 Setting Alert Delivery Methods
You can select the methods used to send alert deliveries, such as by
popup, email, system log, or MSM log. You can select the alert delivery
methods for each event severity level (Information, Warning, Critical and
Fatal).
Perform the following steps to select the alert delivery methods:
1. On the Alerts Notification Configuration screen, click the Alerts
Setting tab.
2. Under the Alerts Delivery Methods heading, select one of the
severity levels.
3. Click Edit .
The Alert Notification Delivery Methods dialog box appears, as
shown in Figure 9.4 .