Lenovo ThinkServer RD230, Software User'S Manual

Page: 181 / 364

Patrol Read-Related Controller Properties 5-11
5.4.10 Display Time and Date on Controller
Use the command in Table 5.12 to display the time and date on the
selected controller(s).
5.5 Patrol Read-Related Controller Properties
You can use the commands in this section to select the settings for Patrol
Read. A Patrol Read scans the system for possible drive errors that could
lead to drive failure, then takes action to correct the errors. The goal is
to protect data integrity by detecting drive failure before the failure can
damage data. The corrective actions depend on the virtual drive
configuration and the type of errors. Patrol Read affects performance; the
more iterations there are, the greater the impact.
5.5.1 Set Patrol Read Options
Use the command in Table 5.13 on the selected controller(s) to set the
Patrol Read options.
Table 5.11 Set Time and Date on Controller
Convention
MegaCli –AdpSetTime yyyymmdd HH:mm:ss -aN|-a0,1,2|-aALL
Description Sets the time and date on the controller. This command uses a 24-hour format.
For example, 7 p.m. displays as
19:00:00
. The order of date and time is reversible.
Table 5.12 Display Time and Date on Controller
Convention
MegaCli –AdpGetTime -aN
Description Displays the time and date on the controller. This command uses a 24-hour format.
For example, 7 p.m. would display as
19:00:00
.