Lenovo ThinkServer RD230, Software User'S Manual

Page: 155 / 364

Viewing and Changing Device Properties 4-79
Figure 4.50 Virtual Drive Screen
The Properties panel of this screen displays the virtual drive’s RAID level,
state, size, and stripe size.
The Policies panel lists the virtual drive policies that were defined when
the storage configuration was created. For information about these
policies, see
Section 4.4.3, “Using Manual Configuration.” To change any
of these policies, make a selection from the drop-down menu and click
Change .
The Operations panel lists operations that can be performed on the
virtual drive. To perform an operation, select it and click
Go . Then choose
from the following options:
•
Select Del to delete this virtual drive. For more information, see
Section 4.8.2, “Deleting a Virtual Drive.”
•
Select Locate to make the LEDs flash on the drives used by this
virtual drive. This works only if the drives are installed in a drive
enclosure that supports SAFTE.