Lenovo System x3750 M4, Installation And Service Manual

Page: 182 / 982

Table 22. Light path diagnostics panel LEDs (continued)
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 5 “Parts listing, Lenovo System x3750 M4 Type 8753” on page 203 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units (FRU).
• If a action step is preceded by (Trained service technician only), that step must be performed only by a trained
service technician.
LED Description Action
LINK Reserved.
CPU An invalid microprocessor
configuration or a
microprocessor has failed
(both the CPU LED and the
CONFIG LED might be lit). 1. If the CONFIG LED is lit, the system issues an invalid
microprocessor configuration error. See CONFIG LED action plan1
on page 167 for more information.
2. If the CPU LED is lit and the CONFIG LED is not lit, complete the
following steps:
a. (Trained service technician only) Make sure that the failing
microprocessor, which is indicated by a lit LED on the system
board or microprocessor and memory expansion tray, is
installed correctly. See “Replacing a microprocessor and heat
sink” on page 287 for more information.
b. If there is no microprocessor and memory expansion tray
installed, remove the DIMM air baffle and check the LEDs on
the system board to see which microprocessor LED is lit, then
do the following:
1) Check the IMM2 event logs for information about the error.
Replace any components that are identified in the error log.
2) (Trained service technician only) Replace the
microprocessor.
c. If the microprocessor and memory expansion tray is installed,
do the following:
1) Check the LEDs on the microprocessor and memory
expansion tray. If one of the microprocessor LEDs is lit,
do the following:
a) (Trained service technician only) Replace the
microprocessor.
2) If the System board error LED is lit on the microprocessor
and memory expansion tray, do the following:
a) Turn off the server. Remove the top cover and the
microprocessor and memory expansion tray; then,
press the
light path button on the system board to light
the LEDs associated with the failed microprocessor
(See “System-board LEDs” on page 32 for the location
of the light path button).
b) (Trained service technician only) Replace the failing
microprocessor, which is indicated by the lit LED on the
system board.
168
Lenovo System x3750 M4 Installation and Service Guide