manualshive.com logo in svg

Lenovo System x3750 M4, Installation And Service Manual

The Lenovo System x3750 M4 is a high-performance server that delivers exceptional reliability and scalability. Ensure a seamless setup with our detailed Installation Instructions Manual available for free download at manualshive.com. This comprehensive manual provides step-by-step guidance to effortlessly install and configure your Lenovo System x3750 M4.

Share
Download
background image

Step 19. Remove all heat sinks and microprocessors, and set them aside on a static-protective surface for

reinstallation (see “Removing a microprocessor and heat sink” on page 283).

Notes:

1. Remove the socket covers from the microprocessor frame brackets on the new system board

and place them on the microprocessor sockets of the old system board that you are removing.

2. Use an alcohol wipe to remove any thermal grease from the tabs on the microprocessor

bracket frame on the old system board.

3. Use the microprocessor tool that comes in the system board FRU to remove and replace

microprocessors.

4. Remove the microprocessors from the old system board and place them directly onto the new

system board sockets. Keep the heat sink and microprocessor from each microprocessor
socket of the old system board together so that you can install them on the new system
board on the same socket together. For example, when you remove the heat sink and
microprocessor from microprocessor socket 1 of the old system board, install them both on
the same socket (socket 1) on the new system board.

Step 20. Remove the backplanes and cables, if necessary to access and remove the system board.

Step 21. Loosen the thumbscrews (near the front of the server) that secure the system board to the server

and slide the system board toward the front of the server.

Note:

Remove the drive backplanes, if necessary.

System board
handles

Thumb screws

Step 22. Grasp both system-board handles and lift up the left side of the system board slightly and carefully

remove it from the chassis, being careful not to damage any surrounding components.

Note:

Use the system-board handles to lift the system board only. Do not attempt to lift the

server using the system board handles.

Step 23. If you are instructed to return the system board, follow all packaging instructions, and use any

packaging materials for shipping that are supplied to you.

Replacing the system board

Use this information to replace the system board.

Chapter 6

.

Removing and replacing components

301

Summary of Contents for System x3750 M4























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x3750 M4

NEC NECCare Platinum Express5800/A1160 Brochure & Specs preview
NECCare Platinum Express5800/A1160
Brand: NEC Pages: 4
NEC NECCare Gold Express5800/320Fd Maintenance And Service Manual preview
NECCare Gold Express5800/320Fd
Brand: NEC Pages: 11
NEC NEC Express5800/R120d-2E Configuration Manual preview
NEC Express5800/R120d-2E
Brand: NEC Pages: 39
NEC UNIVERGE NEAX 2000 IPS Manual preview
UNIVERGE NEAX 2000 IPS
Brand: NEC Pages: 244
NEC UNIVERGE NEAX 2000 IPS General Description Manual preview
UNIVERGE NEAX 2000 IPS
Brand: NEC Pages: 191
NEC UNIVERGE NEAX 2000 IPS Configuration Manual preview
UNIVERGE NEAX 2000 IPS
Brand: NEC Pages: 96
Vxl Itona TC73yy Hardware User'S Manual preview
Itona TC73yy
Brand: Vxl Pages: 19
GlobalTime Electronic GTT-400 Manual preview
GTT-400
Brand: GlobalTime Electronic Pages: 19
B&B Electronics VESR4x4 Quick Start Manual preview
VESR4x4
Brand: B&B Electronics Pages: 2
TRENDnet TE100-PS3 Administrator User Manual preview
TE100-PS3
Brand: TRENDnet Pages: 135
PRG MBOX 2016 Hardware Manual preview
MBOX 2016
Brand: PRG Pages: 50
NAIM NS01 Reference Manual preview
NS01
Brand: NAIM Pages: 20
Planet FPS-1UA User Manual preview
FPS-1UA
Brand: Planet Pages: 93
ClearCube A1010 Quick Start Manual preview
A1010
Brand: ClearCube Pages: 2
NexPath Telephony User Manual preview
Telephony
Brand: NexPath Pages: 166
TAG SV-1002-X2 Operation Manual preview
SV-1002-X2
Brand: TAG Pages: 44
Intel S1200V3RP Technical Product Specification preview
S1200V3RP
Brand: Intel Pages: 270
Acnodes RMC 7132 User Manual preview
RMC 7132
Brand: Acnodes Pages: 98

Brands by name

Popular brands

Load more brands