manualshive.com logo in svg

Lenovo System x3750 M4, Installation And Service Manual

The Lenovo System x3750 M4 is a high-performance server that delivers exceptional reliability and scalability. Ensure a seamless setup with our detailed Installation Instructions Manual available for free download at manualshive.com. This comprehensive manual provides step-by-step guidance to effortlessly install and configure your Lenovo System x3750 M4.

Share
Download
background image

Step 4.

Align the drive in the drive bay and slide the drive into the CD/DVD drive bay until the drive clicks
into place.

Note:

Be sure to align the bend on the drive retention clip tab with the rear edge of the CD/DVD

drive. Your drive might have more mounting holes than what is shown in the illustration. Adjust the
retention clip alignment based on your drive.

0000000

0000000

0000000

0000000

0000000

0000000

000

000

000

000

000

000

000

000

000

000

000

000

000

000

000

000

CD/DVD-ROM
drive

Step 5.

Reconnect the power cord and any cables that you removed.

Step 6.

Replace the server cover and slide the serve back into the rack.

Step 7.

Turn on the peripheral devices and the server.

Removing the CD/DVD cable

Use this information to remove the CD/DVD cable.

To remove the CD/DVD cable, complete the following steps:

Step 1.

Read the safety information and installation guidelines, see “Safety” on page v and “Installation
guidelines” on page 38.

Step 2.

Turn off the server (see “Turning off the server” on page 23) and all attached peripheral devices.
Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.

Step 3.

Remove the top cover (see “Removing the server top cover” on page 216).

Step 4.

Remove the fan cage assembly (see “Removing the fan cage assembly” on page 252).

Step 5.

Slide the CD/DVD out of the server (see “Removing a CD/DVD drive” on page 227).

Step 6.

Facing the front of the server, grasp the cable connector latch (right of the cable connector) and
pull it up toward the rear of the server; then, slide the cable connector to the left to disconnect it
from the optical drive connector on the rear of the optical drive cage.

230

Lenovo System x3750 M4 Installation and Service Guide

Summary of Contents for System x3750 M4























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x3750 M4

D-Link DP 301U Quick Installaion Manual preview
DP 301U
Brand: D-Link Pages: 12
YOKOGAWA SMARTDAG+ GM10 User Manual preview
SMARTDAG+ GM10
Brand: YOKOGAWA Pages: 22
Flexport HF2211 User Manual preview
HF2211
Brand: Flexport Pages: 39
LOYTEC LINX-21 Series Installation Instructions preview
LINX-21 Series
Brand: LOYTEC Pages: 4
Motorola WPS870G - Wireless Print Server User Manual preview
WPS870G - Wireless Print Server
Brand: Motorola Pages: 115
NEC Storage ST1220 User Manual preview
Storage ST1220
Brand: NEC Pages: 69
Siemens Server Installation, Operation And Maintenance Manual preview
Server
Brand: Siemens Pages: 48
Siemens SINUMERIK 840Di sl/840D sl Function Manual preview
SINUMERIK 840Di sl/840D sl
Brand: Siemens Pages: 250
NAIM NS01 Reference Manual preview
NS01
Brand: NAIM Pages: 20
Lantronix CoBox-FL User Manual preview
CoBox-FL
Brand: Lantronix Pages: 135
ADLINK Technology MCS-2040 User Manual preview
MCS-2040
Brand: ADLINK Technology Pages: 62
EVS LSM Connect User Manual preview
LSM Connect
Brand: EVS Pages: 126
Echostreams DSS212S-D5 Quick Manual preview
DSS212S-D5
Brand: Echostreams Pages: 3
ClearCube CD8620 series User Manual preview
CD8620 series
Brand: ClearCube Pages: 5
ClearCube A6108 Quick Start Manual preview
A6108
Brand: ClearCube Pages: 15
3onedata NP308T-8D User Manual preview
NP308T-8D
Brand: 3onedata Pages: 4
Check Point 21000 Appliances G-70 Replacing preview
21000 Appliances G-70
Brand: Check Point Pages: 3
Adaptec 5325301507 - Snap Server 4400 NAS Administrator'S Manual preview
5325301507 - Snap Server 4400 NAS
Brand: Adaptec Pages: 250

Brands by name

Popular brands

Load more brands