Lenovo System x3750 M4 Installation And Service Manual Download Page 19

Page: 19 / 982

The following section introduces Brocade documents that you might find useful for the installation and
administration.

•

EN4023 User Guide

–

Network OS Layer 2 Switching Configuration Guide

http://www.brocade.com/content/html/en/configuration-guide/nos-601a-l2guide/

–

Network OS Command Reference Guide

http://www.brocade.com/content/html/en/command-reference-guide/nos-601a-commandref/index.html

–

Network OS Message Reference

http://www.brocade.com/content/html/en/message-reference-guides/nos-601a-messageref/wwhelp/
wwhimpl/js/html/wwhelp.htm

•

FC5022 User Guide

–

Fabric OS Administrator's Guide

http://www.brocade.com/content/html/en/administration-guide/fos-740-adminguide/

–

Fabric OS Command Reference

http://www.brocade.com/content/html/en/command-reference-guide/fos-741-commandref/wwhelp/
wwhimpl/js/html/wwhelp.htm

–

Fabric OS Message Reference

http://www.brocade.com/content/html/en/message-reference-guides/FOS_740_MESSAGES/wwhelp/
wwhimpl/js/html/wwhelp.htm#href=Title.1.2.html

–

Access Gateway Administrator's Guide

http://www.brocade.com/content/html/en/administration-guide/fos-740-accessgateway/index.html

Notices and statements in this document

Use this information to understand the most common documentation notices and statements and how
they are used.

The caution and danger statements in this document are also in the multilingual

Safety Information

document, which is on the Lenovo

Documentation

CD. Each statement is numbered for reference to the

corresponding statement in your language in the

Safety Information

document.

The following notices and statements are used in this document:

•

Note:

These notices provide important tips, guidance, or advice.

•

Important:

These notices provide information or advice that might help you avoid inconvenient or

problem situations.

•

Attention:

These notices indicate potential damage to programs, devices, or data. An attention notice is

placed just before the instruction or situation in which damage might occur.

•

Caution:

These statements indicate situations that can be potentially hazardous to you. A caution

statement is placed just before the description of a potentially hazardous procedure step or situation.

•

Danger:

These statements indicate situations that can be potentially lethal or extremely hazardous

to you. A danger statement is placed just before the description of a potentially lethal or extremely
hazardous procedure step or situation.

Server features and specifications

Use this information to view specific information about the server, such as server hardware features and
the dimensions of the server.

Chapter 1

The Lenovo System x3750 M4 Type 8753 server

Summary of Contents for System x3750 M4























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for System x3750 M4

Reviews:

Related manuals for System x3750 M4

Brands by name

Popular brands

Lenovo System x3750 M4, Installation And Service Manual

Search results

Summary of Contents for System x3750 M4

Reviews:

Related manuals for System x3750 M4

Brands by name

Popular brands