32
Instruction Manual V 1.1 - 11/2002
6.
Operating the CV5030 in connection with the TS5025 transfer station
The remaining slides can, therefore, be processed by pressing the
START
key. An empty slide rack must then be manually removed from
the bath (using the door and pulling out the bath guide).
6.4
Process-based interruptions
•
Empty coverslip magazine, coverslip break and full output rack are
handled as described in section 5.4. Following the processing, the
empty input rack is placed on the ramp of the TS5025.
•
Error in the unit or process
•
ERROR
mode: continuous alarm, the display shows “
ERROR
” +
error number (see chapter 9, System and Error Messages)
•
Status identical to that reached by pressing
STOP
.
•
If the transfer station contains 3 input racks the message
”TS5020
FULL”
will be displayed.
Open TS flap and remove racks.
•
START
initializes the device.
Summary of Contents for CV5030
Page 2: ......
