Leica CV5030, Instruction Manual

Page: 27 / 44

27
Leica CV5030 - Robotic Coverslipper
The coverslip or slide is released.
• The LIFT key raises the output racks to the extraction position.
Prior to reinitialization, all slides must be removed from the out-
put racks!
• The automatic action of the bath operation is deactivated by press-
ing
STOP . The bath must be manually pulled from the bath channel if
it needs to be removed. However, it is not necessary to remove the
bath prior to reinitialization.
• By pressing START , the unit can now be reinitialized.
(Same state as that following the activation of the unit)
• Interruption by pulling out the bath guide:
• The unit finishes the coverslipping process of the current slide
and pushes it into the output rack.
• The bath is moved to the front position.
The unit switches to READY mode.
5.8Process-based interruptions
Empty coverslip magazine
• In quick mode (selectable via user MENU, see section 5.4):
-
The coverslip transfer arm moves to the resting position,
- ERROR mode: Continuous alarm, display shows “ CHECK COVER
SLIPS ”,
- Acknowledge the audible alarm by pressing the RESPOND key,
- Fill the coverslip magazine,
- Continue the coverslipping process with START (after acknowl-
edging the alarm).
5. Operating the CV5030