26
Instruction Manual V 1.1 - 11/2002
5.7
Interrupting the coverslipping process
Press
PAUSE
to interrupt the coverslipping process.
•
The currently processed slide is completely coverslipped and
pushed into the output rack.
•
The
PAUSE LED
lights up.
•
For extended non-operating times, place the dispensing valve in the
paused position (prime container).
•
The slides and mountant (vent the mountant bottle and prime it after
closing it) can now be refilled.
•
Output racks are raised to the extraction position and can be re-
placed with empty racks.
If the output racks are raised to the extraction position, all
slides must be removed from them!
•
The
RESPOND
(2 s) key is used to modify the coverslipping param-
eters in the user menu (see section 5.4).
•
After opening the door and pulling out the bath guide, the bath is
moved to the front position, which changes the operating mode from
PAUSE
to
READY
.
•
By pressing
START
, the coverslipping process can be continued.
If the dispensing valve was placed in the paused position, reset
it!
Emergency stop using
STOP
.
•
The unit switches to ERROR mode.
The
RESPOND
key acknowledges the audible alarm.
5.
Operating the CV5030
Summary of Contents for CV5030
Page 2: ......
