Leica CV5030, Instruction Manual

Page: 11 / 44

11
Leica CV5030 - Robotic Coverslipper
3. Unit components and technical data
3.3. Scope of delivery
The basic unit is operational without additional accessories. The standard equipment of Leica
CV 5030 consists of:
• 1 basic unit,
• 1 accessory kit consisting of:
•
1 slide rack 30, plastic, pack of 5,
• 1 pack of coverslips, 24 x 50 mm (10 x 100 each),
• 1 Leica CV Ultra mountant, 6 bottles of 100 ml each,
• 2 bottles for mountant, 250 ml, with cover,
• 1 mains cable set: - 1 mains cable UK ST/BU F-5A,
- 1 mains cable D,
- 1 mains cable USA-C-J,
• 1 single open-end wrench 13,
• 1 activated carbon filter (xylene),
• 1 CV5030 instructions for repacking,
• 1 Leica CV5030 instruction manual—E/F/G/S,
• 2 nozzles, 1x large – 18 G, 1x small – 20 G,
• 1 insert for Leica slide racks for 30 slides,
• 5 output racks for 30 slides,
• 3 coverslip magazines, MultiSize TM 40-60 x 24 mm,
• 3 coverslip magazines, MultiSize TM 40-60 x 22 mm,
• 1 pack of suction cups (2 pieces),
• 1 priming container,
• 1 fume tubing, 3 m long, 32 mm diameter ID,
• 1 "Leica" brush,
• 1 Allen key, SW 2.5,
• 1 Allen key, SW 3.0.
Not installed, but included:
•
1 dispensing module,
• 1 bath for receiving slides.
All listed consumables can be replaced by the user.