manualshive.com logo in svg

LeCroy Sierra M6-2, User Manual, Page: 63 / 480

Share
Download
LeCroy Sierra M6-2 User Manual Download Page 63

 

Sierra M6-2 SAS/SATA Protocol Analyzer User Manual

61

Projects

 LeCroy Corporation

R_OK,  or X_RDY and R_RDY. It expects device (or host) to send a response, but response 
is not received after 65000 DWORDs. You set Primitive Response Timeout and HOLD/
HOLDA Response Timeout in the Settings tab Analyzer Settings section.

Frame Type Error

: Wrong frame type.

Frame Length Error

: Reported frame length is different than actual frame length:

Frame Direction Error

: Wrong frame direction. For example, Register Device to Host 

coming from the Host.

CRC Error

: CRC error detected.

ACK/NAK Timeout [SAS only]

: ACK or NAK primitive missing or encountered 

unexpectedly.

Disable “Disparity Error” and “Symbol Violation” during the Speed negotiation

: 

No longer detects Code Violation or Disparity Error.

Delimiter Error

: Detects two SOF primitives without an EOF between them. Also detects 

two EOF primitives without an SOF between them. 

STP Frame (SAS only)

Double-click STP Frame to open the FIS Patterns dialog.

Figure 2.22: SAS: FIS Patterns Dialog

SAS vs. SATA: 

Not available in SATA.

Click the down arrow next to the Type drop-down list box, choose an FIS type to capture 
or exclude, and click 

OK

. Repeat for additional types.

Summary of Contents for Sierra M6-2

































































































































































































































































































































































































































































































Reviews:

No comments