LeCroy Corporation
Scenario Actions
338
Sierra M6
‐
2 SAS/SATA Protocol Analyzer User Manual
Capturing a Data DWORD
InFusion provides the ability to capture individual data DWORDs and provides four
different registers to store captured DWORDs (DWORD #0, #1, #2 and #3).
To capture a data dword, select
Capture
Data
DWORD
from the Action Properties screen,
as shown below. Select the register to be used to store the DWORD from the drop
‐
down
menu under the
Capture
Register
property.
Figure 4.19: Capture Data DWORD Action
Using Captured Data DWORDs
Captured data DWORDs can be used in creating events for data that match the captured
DWORD(s), or in creating actions to substitute the captured DWORD(s) into the data
stream.
To create an event using the captured DWORD, in the Event Properties menu, select
SAS
Data
Pattern
(or
SATA
Data
Pattern
), and then select any of the 12 DWORDs (
DWORD
0
Type
through
DWORD
11
Type
). The drop
‐
down menu provides the choice of a custom
DWORD or any of the four captured DWORDs. If you select a captured DWORD, the
Value
field beneath this selection is hidden (the
Value
field is only used for specifying custom
DWORDs). Note that choice of a mask and an offset are still available when using
captured DWORDs.